API 文档
  • History
  • Introduction
  • API Category
  • Making API Requests
    • Request Structure
    • Common Params
    • Signature v3
    • Signature
    • Responses
  • Site APIs
    • CreateZone
    • DescribeIdentifications
    • ModifyZone
    • DeleteZone
    • ModifyZoneStatus
    • CheckCnameStatus
    • IdentifyZone
    • DescribeZones
    • VerifyOwnership
  • Acceleration Domain Management APIs
    • CreateAccelerationDomain
    • DescribeAccelerationDomains
    • ModifyAccelerationDomain
    • ModifyAccelerationDomainStatuses
    • DeleteAccelerationDomains
    • CreateSharedCNAME
    • BindSharedCNAME
    • DeleteSharedCNAME
  • Site Acceleration Configuration APIs
    • CreateRule
    • DeleteRules
    • DescribeHostsSetting
    • DescribeRules
    • DescribeRulesSetting
    • DescribeZoneSetting
    • ModifyRule
    • ModifyZoneSetting
  • Alias Domain APIs
    • CreateAliasDomain
    • DescribeAliasDomains
    • ModifyAliasDomain
    • ModifyAliasDomainStatus
    • DeleteAliasDomain
  • Security Configuration APIs
    • CreateSecurityIPGroup
    • DescribeSecurityIPGroup
    • ModifySecurityIPGroup
    • DeleteSecurityIPGroup
    • DescribeOriginProtection
    • DescribeSecurityTemplateBindings
    • ModifySecurityPolicy
    • BindSecurityTemplateToEntity
    • DescribeSecurityIPGroupInfo
  • Layer 4 Application Proxy APIs
    • CreateL4Proxy
    • ModifyL4Proxy
    • ModifyL4ProxyStatus
    • DescribeL4Proxy
    • DeleteL4Proxy
    • CreateL4ProxyRules
    • ModifyL4ProxyRules
    • ModifyL4ProxyRulesStatus
    • DescribeL4ProxyRules
    • DeleteL4ProxyRules
    • CreateApplicationProxy
    • ModifyApplicationProxy
    • ModifyApplicationProxyStatus
    • DescribeApplicationProxies
    • DeleteApplicationProxy
    • CreateApplicationProxyRule
    • ModifyApplicationProxyRule
    • ModifyApplicationProxyRuleStatus
    • DeleteApplicationProxyRule
  • Content Management APIs
    • CreatePurgeTask
    • DescribePurgeTasks
    • CreatePrefetchTask
    • DescribePrefetchTasks
    • DescribeContentQuota
  • Data Analysis APIs
    • DescribeDDoSAttackData
    • DescribeDDoSAttackEvent
    • DescribeDDoSAttackTopData
    • DescribeOverviewL7Data
    • DescribeTimingL4Data
    • DescribeTimingL7AnalysisData
    • DescribeTopL7AnalysisData
    • DescribeTimingL7CacheData
    • DescribeTopL7CacheData
  • Log Service APIs
    • DownloadL7Logs
    • DownloadL4Logs
    • CreateCLSIndex
    • CreateRealtimeLogDeliveryTask
    • ModifyRealtimeLogDeliveryTask
    • DeleteRealtimeLogDeliveryTask
    • DescribeRealtimeLogDeliveryTasks
  • Billing APIs
    • CreatePlan
    • UpgradePlan
    • RenewPlan
    • ModifyPlan
    • IncreasePlanQuota
    • DestroyPlan
    • CreatePlanForZone
    • BindZoneToPlan
    • DescribeBillingData
    • DescribeAvailablePlans
  • Certificate APIs
    • DescribeDefaultCertificates
    • ModifyHostsCertificate
  • Load Balancing APIs
    • CreateOriginGroup
    • ModifyOriginGroup
    • DeleteOriginGroup
    • DescribeOriginGroup
  • Custom Response Page APIs
    • CreateCustomizeErrorPage
    • DescribeCustomErrorPages
    • ModifyCustomErrorPage
    • DeleteCustomErrorPage
  • Diagnostic Tool APIs
    • DescribeIPRegion
  • Version Management APIs
    • CreateConfigGroupVersion
    • DeployConfigGroupVersion
    • DescribeConfigGroupVersionDetail
    • DescribeConfigGroupVersions
    • DescribeDeployHistory
    • DescribeEnvironments
  • Data Types
  • Error Codes
当前内容仅提供英语版本,中文版我们将尽快补充,感谢您的理解。

DescribeDDoSAttackData

1. API Description

Domain name for API request: teo.intl.tencentcloudapi.com.

This API is used to query the time-series data of DDoS attacks.

A maximum of 100 requests can be initiated per second for this API.

We recommend you to use API Explorer
Try it
API Explorer provides a range of capabilities, including online call, signature authentication, SDK code generation, and API quick search. It enables you to view the request, response, and auto-generated examples.

2. Input Parameters

The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.

Parameter NameRequiredTypeDescription
ActionYesStringCommon Params. The value used for this API: DescribeDDoSAttackData.
VersionYesStringCommon Params. The value used for this API: 2022-09-01.
RegionNoStringCommon Params. This parameter is not required.
StartTimeYesTimestamp ISO8601Start time of the query period.
EndTimeYesTimestamp ISO8601End time of the query period.
MetricNames.NYesArray of StringStatistical metrics.
  • ddos_attackMaxBandwidth: Peak attack bandwidth;
  • ddos_attackMaxPackageRate: Peak attack packet rate;
  • ddos_attackBandwidth: Time-series data of attack bandwidth;
  • ddos_attackPackageRate: Time-series data of attack packet rate.
  • ZoneIds.NNoArray of StringZoneId set. This parameter is required.
    PolicyIds.NNoArray of IntegerIDs of DDoS policies to be queried. All policies will be selected if this field is not specified.
    IntervalNoStringThe query granularity. Values:
  • min: 1 minute;
  • 5min: 5 minutes;
  • hour: 1 hour;
  • day: 1 day
  • If this field is not specified, the granularity is determined based on the query period.
    Period ≤ 1 hour: min;
    1 hour < Period ≤ 2 days: 5min;
    2 days < Period ≤ 7 days: hour;
    Period > 7 days: day.
    AreaNoStringGeolocation scope. Values:
  • overseas: Regions outside the Chinese mainland
  • mainland: Chinese mainland
  • global: Global
  • If this field is not specified, the default value global is used.

    3. Output Parameters

    Parameter NameTypeDescription
    TotalCountIntegerTotal number of query results.
    DataArray of SecEntryList of DDoS attack data.
    Note: This field may return null, indicating that no valid values can be obtained.
    RequestIdStringThe unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.

    4. Example

    Example1 Querying the Time-series Data of DDoS Attacks

    Input Example

    POST / HTTP/1.1
    Host: teo.intl.tencentcloudapi.com
    Content-Type: application/json
    X-TC-Action: DescribeDDoSAttackData
    <Common request parameters>
    {
        "MetricNames": [
            "ddos_attackMaxBandwidth"
        ],
        "Interval": "min",
        "PolicyIds": [
            1706
        ],
        "ZoneIds": [
            "zone-21xfqlh4qjee"
        ],
        "StartTime": "2022-08-22T00:00:00+00:00",
        "EndTime": "2022-08-23T00:00:00+00:00",
        "Area": "overseas"
    }
    

    Output Example

    {
        "Response": {
            "TotalCount": 1,
            "Data": [
                {
                    "Value": [
                        {
                            "Max": 100,
                            "Metric": "ddos_attackMaxBandwidth",
                            "Avg": 100.0,
                            "Detail": [
                                {
                                    "Value": 100
                                }
                            ],
                            "Sum": 100.0
                        }
                    ],
                    "Key": "ddos_attackMaxBandwidth"
                }
            ],
            "RequestId": "a79e60f8-34cc-4ee5-a7f9-a24adb572c68"
        }
    }
    

    5. Developer Resources

    SDK

    TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.

    Command Line Interface

    6. Error Code

    The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.

    Error CodeDescription
    FailedOperationOperation failed.
    InternalError.ProxyServerAn unknown error occurred in the backend server.
    LimitExceededThe quota limit has been reached.
    LimitExceeded.QueryTimeLimitExceededQuery time limit exceeded.
    ResourceNotFoundThe resource doesn’t exist.
    UnauthorizedOperation.CamUnauthorizedCAM is not authorized.
    UnauthorizedOperation.NoPermissionThe sub-account is not authorized for the operation. Please get permissions first.