请选择
API
  • History
  • Introduction
  • API Category
  • Making API Requests
    • Request Structure
    • Common Params
    • Signature v3
    • Signature
    • Responses
  • Site APIs
    • CreateZone
    • DescribeIdentifications
    • ModifyZone
    • DeleteZone
    • ModifyZoneStatus
    • CheckCnameStatus
    • IdentifyZone
    • DescribeZones
    • VerifyOwnership
  • Acceleration Domain Management APIs
    • CreateAccelerationDomain
    • DescribeAccelerationDomains
    • ModifyAccelerationDomain
    • ModifyAccelerationDomainStatuses
    • DeleteAccelerationDomains
    • CreateSharedCNAME
    • BindSharedCNAME
    • DeleteSharedCNAME
  • Site Acceleration Configuration APIs
    • CreateRule
    • DeleteRules
    • DescribeHostsSetting
    • DescribeRules
    • DescribeRulesSetting
    • DescribeZoneSetting
    • ModifyRule
    • ModifyZoneSetting
  • Alias Domain APIs
    • CreateAliasDomain
    • DescribeAliasDomains
    • ModifyAliasDomain
    • ModifyAliasDomainStatus
    • DeleteAliasDomain
  • Security Configuration APIs
    • CreateSecurityIPGroup
    • DescribeSecurityIPGroup
    • ModifySecurityIPGroup
    • DeleteSecurityIPGroup
    • DescribeOriginProtection
    • DescribeSecurityTemplateBindings
    • ModifySecurityPolicy
    • BindSecurityTemplateToEntity
    • DescribeSecurityIPGroupInfo
  • Layer 4 Application Proxy APIs
    • CreateL4Proxy
    • ModifyL4Proxy
    • ModifyL4ProxyStatus
    • DescribeL4Proxy
    • DeleteL4Proxy
    • CreateL4ProxyRules
    • ModifyL4ProxyRules
    • ModifyL4ProxyRulesStatus
    • DescribeL4ProxyRules
    • DeleteL4ProxyRules
    • CreateApplicationProxy
    • ModifyApplicationProxy
    • ModifyApplicationProxyStatus
    • DescribeApplicationProxies
    • DeleteApplicationProxy
    • CreateApplicationProxyRule
    • ModifyApplicationProxyRule
    • ModifyApplicationProxyRuleStatus
    • DeleteApplicationProxyRule
  • Content Management APIs
    • CreatePurgeTask
    • DescribePurgeTasks
    • CreatePrefetchTask
    • DescribePrefetchTasks
    • DescribeContentQuota
  • Data Analysis APIs
    • DescribeDDoSAttackData
    • DescribeDDoSAttackEvent
    • DescribeDDoSAttackTopData
    • DescribeOverviewL7Data
    • DescribeTimingL4Data
    • DescribeTimingL7AnalysisData
    • DescribeTopL7AnalysisData
    • DescribeTimingL7CacheData
    • DescribeTopL7CacheData
  • Log Service APIs
    • DownloadL7Logs
    • DownloadL4Logs
    • CreateCLSIndex
    • CreateRealtimeLogDeliveryTask
    • ModifyRealtimeLogDeliveryTask
    • DeleteRealtimeLogDeliveryTask
    • DescribeRealtimeLogDeliveryTasks
  • Billing APIs
    • CreatePlan
    • UpgradePlan
    • RenewPlan
    • ModifyPlan
    • IncreasePlanQuota
    • DestroyPlan
    • CreatePlanForZone
    • BindZoneToPlan
    • DescribeBillingData
    • DescribeAvailablePlans
  • Certificate APIs
    • DescribeDefaultCertificates
    • ModifyHostsCertificate
  • Load Balancing APIs
    • CreateOriginGroup
    • ModifyOriginGroup
    • DeleteOriginGroup
    • DescribeOriginGroup
  • Custom Response Page APIs
    • CreateCustomizeErrorPage
    • DescribeCustomErrorPages
    • ModifyCustomErrorPage
    • DeleteCustomErrorPage
  • Diagnostic Tool APIs
    • DescribeIPRegion
  • Version Management APIs
    • CreateConfigGroupVersion
    • DeployConfigGroupVersion
    • DescribeConfigGroupVersionDetail
    • DescribeConfigGroupVersions
    • DescribeDeployHistory
    • DescribeEnvironments
  • Data Types
  • Error Codes
Docs Overview/
API/
Data Analysis APIs/
DescribeTimingL7CacheData/

DescribeTimingL7CacheData

1. API Description

Domain name for API request: teo.tencentcloudapi.com.

This API is used to query the time series traffic data of the L7 cache analysis. It will be deprecated. Use the DescribeTimingL7AnalysisData API instead.

A maximum of 100 requests can be initiated per second for this API.

We recommend you to use API Explorer
Try it
API Explorer provides a range of capabilities, including online call, signature authentication, SDK code generation, and API quick search. It enables you to view the request, response, and auto-generated examples.

2. Input Parameters

The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.

Parameter NameRequiredTypeDescription
ActionYesStringCommon Params. The value used for this API: DescribeTimingL7CacheData.
VersionYesStringCommon Params. The value used for this API: 2022-09-01.
RegionNoStringCommon Params. This parameter is not required.
StartTimeYesTimestamp ISO8601The start time.
EndTimeYesTimestamp ISO8601The end time.
MetricNames.NYesArray of StringThe query metric. Values:
  • l7Cache_outFlux: Response traffic.
  • l7Cache_request: Response requests.
  • l7Cache_outBandwidth: Response bandwidth.
    • ZoneIds.NNoArray of StringZoneId set. This parameter is required.
    Filters.NNoArray of QueryConditionFilter conditions. See below for details:
  • domain
    Filter by the sub-domain name, such as test.example.com
    Type: String
    Required: No
  • url
    Filter by the URL, such as /content. The query period cannot exceed 30 days.
    Type: String
    Required: No
  • resourceType
    Filter by the resource file type, such as jpg, png. The query period cannot exceed 30 days.
    Type: String
    Required: No
  • cacheType
    Filter by the cache hit result.
    Type: String
    Required: No
    Values:
    hit: Cache hit;
    dynamic: Resource non-cacheable;
    miss: Cache miss
  • statusCode
    Filter by the status code. The query period cannot exceed 30 days.
    Type: String
    Required: No
    Values:
    1XX: All 1xx status codes;
    100: 100 status code;
    101: 101 status code;
    102: 102 status code;
    2XX: All 2xx status codes;
    200: 200 status code;
    201: 201 status code;
    202: 202 status code;
    203: 203 status code;
    204: 204 status code;
    205: 205 status code;
    206: 206 status code;
    207: 207 status code;
    3XX: All 3xx status codes;
    300: 300 status code;
    301: 301 status code;
    302: 302 status code;
    303: 303 status code;
    304: 304 status code;
    305: 305 status code;
    307: 307 status code;
    4XX: All 4xx status codes;
    400: 400 status code;
    401: 401 status code;
    402: 402 status code;
    403: 403 status code;
    404: 404 status code;
    405: 405 status code;
    406: 406 status code;
    407: 407 status code;
    408: 408 status code;
    409: 409 status code;
    410: 410 status code;
    411: 411 status code;
    412: 412 status code;
    412: 413 status code;
    414: 414 status code;
    415: 415 status code;
    416: 416 status code;
    417: 417 status code;
    422: 422 status code;
    423: 423 status code;
    424: 424 status code;
    426: 426 status code;
    451: 451 status code;
    5XX: All 5xx status codes;
    500: 500 status code;
    501: 501 status code;
    502: 502 status code;
    503: 503 status code;
    504: 504 status code;
    505: 505 status code;
    506: 506 status code;
    507: 507 status code;
    510: 510 status code;
    514: 514 status code;
    544: 544 status code.
  • tagKey:
    Filter by the tag key
    Type: String
    Required: No
  • tagValue
    Filter by the tag value
    Type: String
    Required: No
    • IntervalNoStringThe query time granularity. Values:
  • min: 1 minute;
  • 5min: 5 minutes;
  • hour: 1 hour;
  • day: 1 day.
    • If this field is not specified, the granularity will be determined based on the interval between the start time and end time as follows: 1-minute granularity applies for a 1-hour interval, 5-minute granularity for a 2-day interval, 1-hour granularity for a 7-day interval, and 1-day granularity for an interval of over 7 days.
    AreaNoStringGeolocation scope. Values:
  • overseas: Regions outside the Chinese mainland
  • mainland: Chinese mainland
  • global: Global
    • If this field is not specified, the default value global is used.

    3. Output Parameters

    Parameter NameTypeDescription
    TotalCountIntegerTotal number of query results.
    DataArray of TimingDataRecordThe list of cached L7 time-series data.
    Note: This field may return null, indicating that no valid values can be obtained.
    RequestIdStringThe unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.

    4. Example

    Example1 Querying the Time Series Traffic Data by Specified Status Code

    Input Example

    POST / HTTP/1.1
Host: teo.tencentcloudapi.com
Content-Type: application/json
X-TC-Action: DescribeTimingL7CacheData
<Common request parameters>

{
    "EndTime": "2022-08-29T19:17:59+08:00",
    "Interval": "day",
    "Area": "mainland",
    "StartTime": "2022-07-31T00:00:00+08:00",
    "MetricNames": [
        "l7Cache_outFlux"
    ],
    "Filters": [
        {
            "Key": "statusCode",
            "Operator": "equals",
            "Value": [
                "1XX",
                "2XX"
            ]
        }
    ],
    "ZoneIds": [
        "zone-2mzegj4vln5f"
    ]
}

    Output Example

    {
    "Response": {
        "RequestId": "1c827ba2-7010-45d2-123b-6d0c4d34ihsx",
        "Data": [
            {
                "TypeKey": "251227260",
                "TypeValue": [
                    {
                        "Avg": 239058,
                        "Detail": [
                            {
                                "Timestamp": 1659139200,
                                "Value": 10
                            },
                            {
                                "Timestamp": 1661731200,
                                "Value": 10
                            }
                        ],
                        "Max": 2363561,
                        "MetricName": "l7Cache_outFlux",
                        "Sum": 7410804
                    }
                ]
            }
        ],
        "TotalCount": 1
    }
}

    5. Developer Resources

    SDK

    TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.

    Command Line Interface

    6. Error Code

    The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.

    Error CodeDescription
    FailedOperationOperation failed.
    LimitExceededThe quota limit has been reached.
    ResourceUnavailableThe resource is unavailable.
    UnauthorizedOperation.CamUnauthorizedCAM is not authorized.