API

History
Introduction
API Category
Making API Requests
- Request Structure
- Common Params
- Signature v3
- Signature
- Responses
Site APIs
- CreateZone
- DescribeIdentifications
- ModifyZone
- DeleteZone
- ModifyZoneStatus
- CheckCnameStatus
- IdentifyZone
- DescribeZones
- VerifyOwnership
Acceleration Domain Management APIs
- CreateAccelerationDomain
- DescribeAccelerationDomains
- ModifyAccelerationDomain
- ModifyAccelerationDomainStatuses
- DeleteAccelerationDomains
- CreateSharedCNAME
- BindSharedCNAME
- DeleteSharedCNAME
Site Acceleration Configuration APIs
- CreateRule
- DeleteRules
- DescribeHostsSetting
- DescribeRules
- DescribeRulesSetting
- DescribeZoneSetting
- ModifyRule
- ModifyZoneSetting
Alias Domain APIs
- CreateAliasDomain
- DescribeAliasDomains
- ModifyAliasDomain
- ModifyAliasDomainStatus
- DeleteAliasDomain
Security Configuration APIs
- CreateSecurityIPGroup
- DescribeSecurityIPGroup
- ModifySecurityIPGroup
- DeleteSecurityIPGroup
- DescribeOriginProtection
- DescribeSecurityTemplateBindings
- ModifySecurityPolicy
- BindSecurityTemplateToEntity
- DescribeSecurityIPGroupInfo
Layer 4 Application Proxy APIs
- CreateL4Proxy
- ModifyL4Proxy
- ModifyL4ProxyStatus
- DescribeL4Proxy
- DeleteL4Proxy
- CreateL4ProxyRules
- ModifyL4ProxyRules
- ModifyL4ProxyRulesStatus
- DescribeL4ProxyRules
- DeleteL4ProxyRules
- CreateApplicationProxy
- ModifyApplicationProxy
- ModifyApplicationProxyStatus
- DescribeApplicationProxies
- DeleteApplicationProxy
- CreateApplicationProxyRule
- ModifyApplicationProxyRule
- ModifyApplicationProxyRuleStatus
- DeleteApplicationProxyRule
Content Management APIs
- CreatePurgeTask
- DescribePurgeTasks
- CreatePrefetchTask
- DescribePrefetchTasks
- DescribeContentQuota
Data Analysis APIs
- DescribeDDoSAttackData
- DescribeDDoSAttackEvent
- DescribeDDoSAttackTopData
- DescribeOverviewL7Data
- DescribeTimingL4Data
- DescribeTimingL7AnalysisData
- DescribeTopL7AnalysisData
- DescribeTimingL7CacheData
- DescribeTopL7CacheData
Log Service APIs
- DownloadL7Logs
- DownloadL4Logs
- CreateCLSIndex
- CreateRealtimeLogDeliveryTask
- ModifyRealtimeLogDeliveryTask
- DeleteRealtimeLogDeliveryTask
- DescribeRealtimeLogDeliveryTasks
Billing APIs
- CreatePlan
- UpgradePlan
- RenewPlan
- ModifyPlan
- IncreasePlanQuota
- DestroyPlan
- CreatePlanForZone
- BindZoneToPlan
- DescribeBillingData
- DescribeAvailablePlans
Certificate APIs
- DescribeDefaultCertificates
- ModifyHostsCertificate
Load Balancing APIs
- CreateOriginGroup
- ModifyOriginGroup
- DeleteOriginGroup
- DescribeOriginGroup
Custom Response Page APIs
- CreateCustomizeErrorPage
- DescribeCustomErrorPages
- ModifyCustomErrorPage
- DeleteCustomErrorPage
Diagnostic Tool APIs
- DescribeIPRegion
Version Management APIs
- CreateConfigGroupVersion
- DeployConfigGroupVersion
- DescribeConfigGroupVersionDetail
- DescribeConfigGroupVersions
- DescribeDeployHistory
- DescribeEnvironments
Data Types
Error Codes

DescribeTopL7CacheData

1. API Description

Domain name for API request: teo.tencentcloudapi.com.

This API is used to query the top N data of the L7 cache analysis. It will be deprecated. Use the DescribeTopL7AnalysisData API instead.

A maximum of 100 requests can be initiated per second for this API.

We recommend you to use API Explorer

Try it

API Explorer provides a range of capabilities, including online call, signature authentication, SDK code generation, and API quick search. It enables you to view the request, response, and auto-generated examples.

2. Input Parameters

The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.

Parameter Name	Required	Type	Description
Action	Yes	String	Common Params. The value used for this API: DescribeTopL7CacheData.
Version	Yes	String	Common Params. The value used for this API: 2022-09-01.
Region	No	String	Common Params. This parameter is not required.
StartTime	Yes	Timestamp ISO8601	The start time.
EndTime	Yes	Timestamp ISO8601	The end time.
MetricName	Yes	String	The query metric. Values: l7Cache_outFlux_domain: Host/Domain name; l7Cache_outFlux_url: URL address; l7Cache_outFlux_resourceType: Resource type; l7Cache_outFlux_statusCode: Status code.
ZoneIds.N	No	Array of String	ZoneId set. This parameter is required.
Limit	No	Integer	The number of data entries to be queried. The maximum value is 1000. If it is not specified, the value 10 is used by default, indicating that the top 10 data entries.
Filters.N	No	Array of QueryCondition	Filter conditions. See below for details: `domain` Filter by the sub-domain name, such as `test.example.com` Type: String Required: No `url` Filter by the URL, such as `/content`. The query period cannot exceed 30 days. Type: String Required: No `resourceType` Filter by the resource file type, such as `jpg`, `png`. The query period cannot exceed 30 days. Type: String Required: No cacheType Filter by the cache hit result. Type: String Required: No Values: `hit`: Cache hit; `dynamic`: Resource non-cacheable; `miss`: Cache miss `statusCode` Filter by the status code. The query period cannot exceed 30 days. Type: String Required: No Values: `1XX`: All 1xx status codes; `100`: 100 status code; `101`: 101 status code; `102`: 102 status code; `2XX`: All 2xx status codes; `200`: 200 status code; `201`: 201 status code; `202`: 202 status code; `203`: 203 status code; `204`: 204 status code; `205`: 205 status code; `206`: 206 status code; `207`: 207 status code; `3XX`: All 3xx status codes; `300`: 300 status code; `301`: 301 status code; `302`: 302 status code; `303`: 303 status code; `304`: 304 status code; `305`: 305 status code; `307`: 307 status code; `4XX`: All 4xx status codes; `400`: 400 status code; `401`: 401 status code; `402`: 402 status code; `403`: 403 status code; `404`: 404 status code; `405`: 405 status code; `406`: 406 status code; `407`: 407 status code; `408`: 408 status code; `409`: 409 status code; `410`: 410 status code; `411`: 411 status code; `412`: 412 status code; `412`: 413 status code; `414`: 414 status code; `415`: 415 status code; `416`: 416 status code; `417`: 417 status code; `422`: 422 status code; `423`: 423 status code; `424`: 424 status code; `426`: 426 status code; `451`: 451 status code; `5XX`: All 5xx status codes; `500`: 500 status code; `501`: 501 status code; `502`: 502 status code; `503`: 503 status code; `504`: 504 status code; `505`: 505 status code; `506`: 506 status code; `507`: 507 status code; `510`: 510 status code; `514`: 514 status code; `544`: 544 status code. `tagKey`: Filter by the tag key Type: String Required: No `tagValue` Filter by the tag value Type: String Required: No
Interval	No	String	The query time granularity. Values: `min`: 1 minute; `5min`: 5 minutes; `hour`: 1 hour; `day`: 1 day. If this field is not specified, the granularity will be determined based on the interval between the start time and end time as follows: 1-minute granularity applies for a 1-hour interval, 5-minute granularity for a 2-day interval, 1-hour granularity for a 7-day interval, and 1-day granularity for an interval of over 7 days.
Area	No	String	Geolocation scope. Values: `overseas`: Regions outside the Chinese mainland `mainland`: Chinese mainland `global`: Global If this field is not specified, the default value `global` is used.

3. Output Parameters

Parameter Name	Type	Description
TotalCount	Integer	Total number of query results.
Data	Array of TopDataRecord	The list of cached L7 top-ranked traffic data. Note: This field may return null, indicating that no valid values can be obtained.
RequestId	String	The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.

4. Example

Example1 Querying the Top Traffic Data by Specified Status Code

Input Example

POST / HTTP/1.1
Host: teo.tencentcloudapi.com
Content-Type: application/json
X-TC-Action: DescribeTopL7CacheData
<Common request parameters>

{
    "Area": "mainland",
    "Interval": "day",
    "Limit": "5",
    "StartTime": "2022-07-31T00:00:00+08:00",
    "EndTime": "2022-08-29T19:17:59+08:00",
    "MetricName": "l7Cache_outFlux_cacheType",
    "Filters": [
        {
            "Key": "statusCode",
            "Operator": "equals",
            "Value": [
                "2XX",
                "3XX"
            ]
        }
    ],
    "ZoneIds": [
        "zone-2mzegj4vln5f"
    ]
}

Output Example

{
    "Response": {
        "RequestId": "64463c6f-3296-47fa-b168-2040f841eed1",
        "Data": [
            {
                "DetailData": [
                    {
                        "Key": "hit",
                        "Value": 5810001
                    },
                    {
                        "Key": "miss",
                        "Value": 658
                    }
                ],
                "TypeKey": "251227260"
            }
        ],
        "TotalCount": 1
    }
}

5. Developer Resources

SDK

TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.

Command Line Interface

Tencent Cloud CLI 3.0

6. Error Code

The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.

Error Code	Description
FailedOperation	Operation failed.
LimitExceeded.QueryTimeLimitExceeded	Query time limit exceeded.
ResourceUnavailable	The resource is unavailable.
UnauthorizedOperation.CamUnauthorized	CAM is not authorized.

1. API Description
2. Input Parameters
3. Output Parameters
4. Example
Example1 Querying the Top Traffic Data by Specified Status Code
5. Developer Resources
SDK
Command Line Interface
6. Error Code