Domain Service FAQs
Why do I get a CNAME and MX record conflict prompt when adding a DNS resolution record?
Take
example.com as an example.Record type | Host | Value |
MX | www | mx.mail.com |
CNAME | www | test.edgeone.com |
When performing a recursive resolution query, each record type has different priority, and CNAME has the highest priority. See RFC1034 and RFC2181. Therefore, during the resolution request process, the CNAME resolution record result will be returned first. When the host record value is the same, CNAME record and MX record cannot be configured at the same time, and you will get a prompt about the conflict.
If you do need to add CNAME and MX records at the same time when the host record is @, EdgeOne allows you to configure CNAME and records at the same time:
Record type | Host | Value |
MX | @ | mx.mail.com |
CNAME | @ | test.edgeone.com |
Reminder:
This configuration will lead to unstable mailbox reception. If the Local DNS of the mailbox server prioritizes the resolution of the CNAME type of the @ record, the resolution of the MX type of the @ record will be affected, resulting in a resolution failure. If the host record is not @ , but the MX and CNAME records still indicate a conflict, please refer to the description of other record type conflicts below.
Why do I get a CNAME and TXT record conflict prompt when adding a DNS resolution record?
Take
example.com as an example.Record type | Host | Value |
TXT | www | edgeone-txt-flag |
CNAME | www | test.edgeone.com |
The CNAME record has the highest priority, so if the host record is the same, configuring the CNAME record and the TXT record at the same time may cause the TXT record to fail to be parsed. In this case, EdgeOne will prompt record conflict.
If you do need to add CNAME and MX records at the same time when the host record is @, EdgeOne allows you to configure CNAME and TXT records at the same time:
Record type | Host | Value |
TXT | @ | edgeone-txt-flag |
CNAME | @ | test.edgeone.com |
Reminder:
This configuration will cause the TXT verification to fail, you can remove the CNAME record to solve this problem. TXT and CNAME records will still conflict when the host record is not @.
How do the record types conflict with one another?
See below for details:
✓: No conflict. When the HOST is the same, these two record types can both be configured. For example, after configuring the A record for
www.example.com, you can still configure the MX record.×: Conflict. When the HOST is the same, these two record types cannot be both configured. For example, after configuring the A record for
www.example.com, you can not configure the CNAME record.Record type | A | AAAA | CNAME | MX | NS | TXT | SRV | CAA |
A | ✓ | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
AAAA | ✓ | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
CNAME | × | × | × | × | × | × | × | × |
MX | ✓ | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
NS | × | × | × | × | ✓ | × | × | × |
TXT | ✓ | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
SRV | ✓ | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
CAA | ✓ | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
Note
The table above shows the conflict relationship when the HOST is not @. If the HOST is @, a CNAME record does not conflict with an MX or TXT record.
When the record type is A/AAAA/CNAME, can I configure both the resolution and acceleration when the HOST is the same?
Take the following configuration as an example:
Record type | Host | Value |
A | www | 1.1.1.1 |
A | www | 2.2.2.2 |
In this case, if you want to enable acceleration for one record, there will be a conflict. To enable acceleration for
1.1.1.1, you need to delete 2.2.2.2 first.Note
The above conflict happens on A/AAAA/CNAME records.
Which access ports are supported by default?
EdgeOne supports the access ports 80, 8080, and 443 by default.
What happens if there are multiple A/AAAA/CNAME records with the same host record name and no weights are set?
If there are multiple A/AAAA records with the same host record name and no weights are set, all the A/AAAA records will be returned. If there are multiple CNAME records with the same host record name and no weights are set, one of the CNAME records will be returned using a round-robin method.
- Why do I get a CNAME and MX record conflict prompt when adding a DNS resolution record?
- Why do I get a CNAME and TXT record conflict prompt when adding a DNS resolution record?
- How do the record types conflict with one another?
- When the record type is A/AAAA/CNAME, can I configure both the resolution and acceleration when the HOST is the same?
- Which access ports are supported by default?
- What happens if there are multiple A/AAAA/CNAME records with the same host record name and no weights are set?